Diffstat (limited to 'config.sh')
| -rwxr-xr-x | config.sh | 367 |
1 files changed, 356 insertions, 11 deletions
@@ -2,6 +2,14 @@ set -euxo pipefail +installarch=$(uname -m) +kver=$(basename "$(ls -d /usr/lib/modules/*/)") + +if [[ $installarch != "aarch64" ]]; then + printf 'Error: this specific config is only meant for Surface Pro 12", and it is built on ARM64 chip (you have "%s" as build arch).' "$installarch" + exit 1 +fi + #====================================== # Functions... #-------------------------------------- @@ -16,7 +24,7 @@ echo "Configure image: [$kiwi_iname]-[$kiwi_profiles]..." #====================================== # Set SELinux booleans #-------------------------------------- -if [[ "$kiwi_profiles" != *"Container"* ]] && [[ "$kiwi_profiles" != *"FEX"* ]]; then +if [[ "$kiwi_profiles" != *"Container"* ]] && [[ "$kiwi_profiles" != *"FEX"* ]] && [[ "$kiwi_profiles" != *"WSL"* ]]; then ## Fixes KDE Plasma, see rhbz#2058657 setsebool -P selinuxuser_execmod 1 fi @@ -41,6 +49,22 @@ if [[ "$kiwi_profiles" != *"Container"* ]] && [[ "$kiwi_profiles" != *"FEX"* ]] echo "GRUB_DISABLE_SUBMENU=true" >> /etc/default/grub ## Disable recovery entries to match Fedora echo "GRUB_DISABLE_RECOVERY=true" >> /etc/default/grub + ## Surface Pro 12" (Snapdragon X1P-42-100): grub's gfxterm/GOP video probing + ## crashes on this GPU. Force plain text console, skip framebuffer handoff. + echo "GRUB_TERMINAL_OUTPUT=console" >> /etc/default/grub + echo "GRUB_GFXPAYLOAD_LINUX=text" >> /etc/default/grub + ## Surface Pro 12": GRUB_DEVICETREE is the only mechanism Fedora honours for + ## putting a devicetree line in a BLS entry -- 20-grub.install's mkbls emits + ## "devicetree /dtb-$kver/$GRUB_DEVICETREE". /etc/kernel/devicetree does + ## nothing here: /boot/<machine-id> does not exist, so kernel-install runs + ## with layout=other and 90-loaderentry.install (which would read it) bails. + echo "GRUB_DEVICETREE=qcom/x1p42100-microsoft-surface-pro-12-inch.dtb" >> /etc/default/grub + ## Upstream sets menu_auto_hide=1 + boot_indeterminate=1 here for Disk images + ## to match anaconda's behaviour. Deliberately not done for Surface Pro 12": + ## with the menu hidden, GRUB counts down GRUB_TIMEOUT against a blank screen + ## and then crashes during the hand-off on this firmware, so the first boot + ## always fails and only the second succeeds. The equivalent for the + ## anaconda-installed system is the /etc/anaconda/conf.d drop-in below. fi #====================================== @@ -115,7 +139,7 @@ fi #-------------------------------------- if [[ "$kiwi_profiles" == *"Disk"* ]]; then - if [[ "$kiwi_profiles" != *"GNOME"* ]]; then + if [[ "$kiwi_profiles" != *"GNOME"* ]] && [[ "$kiwi_profiles" != *"KDE"* ]] && [[ "$kiwi_profiles" != *"COSMIC"* ]]; then ## Enable initial-setup systemctl enable initial-setup.service ## Enable reconfig mode @@ -138,15 +162,6 @@ fi # Setup default customizations #-------------------------------------- -if [[ "$kiwi_profiles" == *"Disk"* ]]; then - # Find the architecture we are on - installarch=$(uname -m) - # Setup Raspberry Pi firmware - if [[ $installarch == "aarch64" ]]; then - cp -a /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin - fi -fi - if [[ "$kiwi_profiles" == *"Server"* ]]; then # Trigger lvm-devices-import.path and .service to create # a new /etc/lvm/devices/system.devices for the root VG. @@ -173,6 +188,20 @@ cat > /etc/NetworkManager/conf.d/99-azure-unmanaged-devices.conf << EOF [keyfile] unmanaged-devices=driver:mlx4_core;driver:mlx5_core EOF + +# Configure DHCP timeout for Azure to retry indefinitely during VM provisioning +cat > /etc/NetworkManager/conf.d/99-azure-dhcp-timeout.conf << EOF +# Azure requires VMs to attempt DHCP for at least 300 seconds during provisioning, +# as that's the upper bound of how long Azure waits to make networking available. +# NetworkManager's ipv4.dhcp-timeout setting accepts 2147483647 as a special value +# representing infinity, which ensures DHCP keeps retrying indefinitely. This is +# more robust than a fixed timeout and matches systemd-networkd's default behavior. +# Both IPv4 and IPv6 are configured to prepare for IPv6-only scenarios. +# Reference: https://networkmanager.dev/docs/api/latest/nm-settings-nmcli.html +[connection] +ipv4.dhcp-timeout=2147483647 +ipv6.dhcp-timeout=2147483647 +EOF fi if [[ "$kiwi_profiles" == *"GCE"* ]]; then @@ -214,6 +243,13 @@ chmod 600 /root/.ssh/authorized_keys chown -R root:root /root/.ssh fi +# https://bugzilla.redhat.com/show_bug.cgi?id=2356069 +if [[ "$kiwi_profiles" == *"Container"* ]] && [[ "$kiwi_profiles" != *"Init"* ]]; then + if [[ -f /usr/lib/tmpfiles.d/rootfiles.conf ]]; then + systemd-tmpfiles --create /usr/lib/tmpfiles.d/rootfiles.conf + fi +fi + if [[ "$kiwi_profiles" == *"Container"* ]] || [[ "$kiwi_profiles" == *"FEX"* ]]; then # Set install langs macro so that new rpms that get installed will # only install langs that we limit it to. @@ -282,6 +318,100 @@ if [[ "$kiwi_profiles" == *"Container"* ]] || [[ "$kiwi_profiles" == *"FEX"* ]]; fi fi +if [[ "$kiwi_profiles" == *"Jam"* ]]; then +# Override boot configuration in Anaconda to enable threaded IRQs +cat > /usr/share/anaconda/post-scripts/85-jam-threadirqs.ks << THREADIRQS_EOF +%post + +echo "Enable threaded IRQs" +grubby --update-kernel=ALL --args="threadirqs" +%end +THREADIRQS_EOF + +# Override new user configuration to add audio groups +sed -e "s/UserGroups=.*/UserGroups=wheel,jackuser,audio/" -i /etc/xdg/plasmasetuprc + +# Override livesys-kde settings +cat >> /var/lib/livesys/livesys-session-extra << EOF + +#setup kickoff favorites +/bin/mkdir -p /etc/skel/.config + +JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/mozilla-thunderbird.desktop,/usr/share/applications/studio-controls.desktop,/usr/share/applications/ardour6.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop +JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,\$JAMFAVORITES + +cat <<FOE >> /etc/skel/.config/kickoffrc +[Favorites] +FavoriteURLs=\$JAMFAVORITES +FOE + +/usr/sbin/usermod -a -G jackuser,audio liveuser +EOF +fi + +if [[ "$kiwi_profiles" == *"Design_suite"* ]]; then +# Add link to lists of tutorials +cat >> /usr/share/applications/list-design-tutorials.desktop << FOE +[Desktop Entry] +Name=List of design tutorials +GenericName=List of Tutorials for Designers +Comment=Reference of Design Related Tutorials +Exec=xdg-open https://fedoraproject.org/wiki/Design_Suite/Tutorials +Type=Application +Icon=applications-graphics +Categories=Graphics;Documentation; +FOE +chmod a+x /usr/share/applications/list-design-tutorials.desktop + +# Add information about Fedora Design Suite +cat >> /usr/share/applications/fedora-design-suite.desktop << FOE +[Desktop Entry] +Name=Design Suite Info +GenericName=About Design Suite +Comment=Wiki page of Design Suite +Exec=xdg-open https://fedoraproject.org/wiki/Design_Suite +Type=Application +Icon=applications-internet +Categories=Documentation; +FOE +chmod a+x /usr/share/applications/fedora-design-suite.desktop + +# Add information about Fedora Design Team +cat >> /usr/share/applications/fedora-design-team.desktop << FOE +[Desktop Entry] +Name=Design Team Info +GenericName=About Design Team +Comment=Documentation about Design Team +Exec=xdg-open https://docs.fedoraproject.org/en-US/design/ +Type=Application +Icon=applications-internet +Categories=Documentation; +FOE +chmod a+x /usr/share/applications/fedora-design-team.desktop + +# Use Powerline in bash +cat >> /etc/profile.d/powerline-shell.sh << FOE +# Enable powerline daemon +if [ -f `which powerline-daemon` ]; then + powerline-daemon -q + POWERLINE_BASH_CONTINUATION=1 + POWERLINE_BASH_SELECT=1 + . /usr/share/powerline/bash/powerline.sh +fi +FOE +chmod 644 /etc/profile.d/powerline-shell.sh +# End powerline override + +# Override the favorite desktop application in Dash +cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE +[org.gnome.shell] +favorite-apps=['org.mozilla.firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop', 'krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'kdenlive.desktop', 'nautilus.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop'] +FOE + +# Rebuild schema cache with any overrides we installed +glib-compile-schemas /usr/share/glib-2.0/schemas +fi + if [[ "$kiwi_profiles" == *"SoaS"* ]]; then # Get proper release naming in the control panel cat >> /boot/olpc_build << EOF @@ -303,6 +433,219 @@ EOF fi #====================================== +# Surface Pro 12" customizations +#-------------------------------------- + +# /etc/surface-dtb is the master copy 60-surface-dtb.install re-stages into each +# new kernel's module tree on update. The other two are what that hook and +# 10-devicetree.install would normally produce, done up front here because +# kernel-install never runs during this build -- without the module-tree copy, +# anything keyed off /usr/lib/modules/$kver/dtb (including the anaconda +# post-script) finds nothing and silently does nothing. +install -Dm644 /tmp/harrisonvanderbyl/surface-pro-12-inch-linux/boot/dtb \ + "/etc/surface-dtb/x1p42100-microsoft-surface-pro-12-inch.dtb" +install -Dm644 /tmp/harrisonvanderbyl/surface-pro-12-inch-linux/boot/dtb \ + "/usr/lib/modules/$kver/dtb/qcom/x1p42100-microsoft-surface-pro-12-inch.dtb" +install -Dm644 /tmp/harrisonvanderbyl/surface-pro-12-inch-linux/boot/dtb \ + "/boot/dtb-$kver/qcom/x1p42100-microsoft-surface-pro-12-inch.dtb" +# /boot/dtb -> dtb-$kver is what grubby's 10-devicetree.install maintains, and +# what the boot loader entry's devicetree path resolves through +ln -sfn "dtb-$kver" /boot/dtb +# Defer qcom_q6v5_pas past switch-root so the DSPs' auto_boot can actually find +# their firmware; see the comments in the file for the full failure mode. +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/dracut.conf.d/surface-pro-12-inch.conf \ + /etc/dracut.conf.d/surface-pro-12-inch.conf +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/kernel/cmdline \ + /etc/kernel/cmdline +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/kernel/devicetree \ + /etc/kernel/devicetree +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/kernel/install.conf \ + /etc/kernel/install.conf +install -Dm755 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/usr/lib/kernel/install.d/60-surface-dtb.install \ + /usr/lib/kernel/install.d/60-surface-dtb.install +# Puts the "devicetree" line into the BLS entry. This is the only mechanism that +# survives an anaconda install: /etc/kernel/devicetree is never read (layout is +# always "other" on Fedora, so 90-loaderentry.install bails) and GRUB_DEVICETREE +# is dropped when anaconda rewrites /etc/default/grub from its own key list. +# kernel-install plugins do run in the target during installation, and sorting +# after 20-grub.install means the entry it generates is already there to patch. +install -Dm755 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/usr/lib/kernel/install.d/95-surface-dtb-patch.install \ + /usr/lib/kernel/install.d/95-surface-dtb-patch.install +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/udev/rules.d/61-sensors-surface-pro-12-inch.rules \ + /etc/udev/rules.d/61-sensors-surface-pro-12-inch.rules + +if [[ "$kiwi_profiles" == *"Live"* ]]; then + # Stop anaconda hiding the GRUB menu on the installed system's first boot. + # Only meaningful in the installer environment, hence Live-only; see the + # comments in the file for why a hidden menu breaks this device. + install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/anaconda/conf.d/90-surface-pro-12-inch.conf \ + /etc/anaconda/conf.d/90-surface-pro-12-inch.conf + + # Ship the CD-boot grub on the ISO, not the disk-boot one. + # + # kiwi picks the ISO's EFI loader by globbing the image root (see + # Defaults.get_unsigned_grub_loader, target_type='iso'). That pattern list + # has a CD-boot entry for x86_64 (gcdx64.efi) but none for aarch64, so here + # it falls through to grubaa64.efi -- the *disk* image, whose baked-in grub + # prefix is /EFI/fedora. Meanwhile kiwi writes its earlyboot config to + # /EFI/BOOT/grub.cfg, and iso-esp-excludes.yaml deletes "fedora" from the + # embedded ESP outright (rhbz#2358785). Net result on aarch64: the loader + # looks for its config in a directory that was deliberately removed, fails + # to load normal.mod, and dies before drawing anything -- black screen. + # + # gcdaa64.efi is byte-for-byte the same grub except its prefix is /EFI/BOOT, + # which is exactly where kiwi puts the config. Overwrite the path kiwi globs + # so it picks that one up instead. + # + # Only affects direct UEFI boot. Ventoy never executes this binary -- it + # loopback-mounts the ISO and runs /boot/grub2/grub.cfg under its own grub. + cp -a /boot/efi/EFI/fedora/gcdaa64.efi /boot/efi/EFI/fedora/grubaa64.efi +fi + +# 51-dracut-rescue.install isn't UKI-aware -- it unconditionally sed's a BLS +# loader entry that layout=uki never creates. Mask it (kernel-install(8)'s +# documented way to disable a plugin: a /dev/null symlink of the same name). +mkdir -p /etc/kernel/install.d +ln -sf /dev/null /etc/kernel/install.d/51-dracut-rescue.install +# kernel-core's own package scriptlet already ran kernel-install once, before +# this mask existed (root overlay lands after package install), leaving a +# stale rescue image behind. Remove it now so kiwi's systemd_boot EFI-FAT-image +# step doesn't try to cram it in too. +rm -f /boot/initramfs-0-rescue-*.img /boot/loader/entries/*-0-rescue.conf + +# GPU/ADSP/CDSP firmware + qcom DSP/sensor share config from the device tree repo +# (readme.md: "recursively copy the files in ./lib/ to /lib/", same for ./usr/) +cp -a /tmp/harrisonvanderbyl/surface-pro-12-inch-linux/lib/. /lib/ +cp -a /tmp/harrisonvanderbyl/surface-pro-12-inch-linux/usr/. /usr/ + +build_tmp=$(mktemp -d) + +# Snapshot what's installed before pulling in build-only tooling, so we can +# remove exactly what this block adds afterward -- and nothing Kiwi's own +# package lists (other team/desktop profiles) already wanted installed. +pkgs_before=$(mktemp) +rpm -qa --qf '%{NAME}\n' | sort > "$pkgs_before" + +# Wi-Fi (ath12k) board file fixup, adapted from dwhinham/linux-surface-pro-11 +dnf install -y python3 curl zstd +( + cd "$build_tmp" + cp /lib/firmware/ath12k/WCN7850/hw2.0/board-2.bin* . + if [ -f board-2.bin.zst ]; then + zstd -d board-2.bin.zst + elif [ -f board-2.bin.xz ]; then + xz -d board-2.bin.xz + fi + curl --output bdencoder.py -sL \ + https://raw.githubusercontent.com/qca/qca-swiss-army-knife/refs/heads/master/tools/scripts/ath12k/ath12k-bdencoder + python3 bdencoder.py --extract board-2.bin + rm -f bdencoder.py + mv "bus=pci,vendor=17cb,device=1107,subsystem-vendor=17cb,subsystem-device=3378,qmi-chip-id=2,qmi-board-id=255.bin" \ + /lib/firmware/ath12k/WCN7850/hw2.0/board.bin +) + +# AudioReach topology; alsatplg (the topology *compiler*) is build-only, the +# compiled blob is what ships. alsa-ucm-utils' UCM profiles are read at runtime +# by the audio stack, so that one's installed separately, alongside v4l-utils below. +dnf install -y git cmake gcc gcc-c++ make pkgconf-pkg-config alsa-topology-utils m4 +( + cd /tmp/linux-msm/audioreach-topology + git clone https://github.com/linux-msm/audioreach-topology + cd audioreach-topology + export FW_LOCATION=/lib/firmware + cmake . + make + make install +) + +# hexagonrpc + libssc + iio-sensor-proxy (fastrpc/sensor stack); not packaged in Fedora +dnf install -y \ + systemd-devel libgudev-devel polkit-devel gtk3-devel python3-devel \ + meson ninja-build gcc gcc-c++ git pkgconf-pkg-config \ + libqmi-devel glib2-devel protobuf3-c-devel gobject-introspection-devel +# meson's default prefix is /usr/local, and Fedora's dynamic linker does not +# search there -- /etc/ld.so.conf.d ships only iscsi and pipewire entries. Without +# this, libhexagonrpc.so installs fine but ld.so can't find it, and hexagonrpcd +# dies at startup with "no libhexagonrpc.so" (which then takes iio-sensor-proxy +# down with it via Requires=). Cover both libdir spellings. +printf '/usr/local/lib\n/usr/local/lib64\n' > /etc/ld.so.conf.d/surface-pro-12-inch.conf +( + cd /tmp/harrisonvanderbyl/hexagonrpc + meson setup build + ninja -C build + ninja -C build install + ldconfig +) +( + cd /tmp/DylanVanAssche/libssc + meson setup _build + meson compile -C _build + meson install -C _build + ldconfig +) +( + cd /tmp/harrisonvanderbyl/iio-sensor-proxy + meson _build -Dssc-support=enabled -Dprefix=/usr + ninja -v -C _build install +) + +# Remove exactly what got newly installed since the snapshot above (compilers, +# -devel headers, alsatplg, and whatever they pulled in transitively). Anything +# that was already installed before -- because some other team/desktop profile +# in this same build wanted it, or it's part of the base image -- is left alone. +pkgs_new=$(comm -13 "$pkgs_before" <(rpm -qa --qf '%{NAME}\n' | sort)) +if [ -n "$pkgs_new" ]; then + dnf remove -y $pkgs_new +fi +rm -f "$pkgs_before" + +# UCM profiles read at runtime by the audio stack +dnf install -y alsa-ucm-utils + +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/systemd/system/hexagonrpc.service \ + /etc/systemd/system/hexagonrpc.service +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/systemd/system/iio-sensor-proxy.service \ + /etc/systemd/system/iio-sensor-proxy.service +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/udev/rules.d/61-sensors-surface-pro-12-inch.rules \ + /etc/udev/rules.d/61-sensors-surface-pro-12-inch.rules +systemctl enable hexagonrpc.service iio-sensor-proxy.service + +# Rear camera pipeline (msm/camss) needs /dev/media0, which only exists once the +# real silicon probes on the booted system -- install the wiring but do not run +# it here, there is no camera hardware in the KIWI build chroot. +dnf install -y v4l-utils +install -Dm755 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/usr/local/bin/wireupcameras.sh \ + /usr/local/bin/wireupcameras.sh +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/systemd/system/wireupcameras.service \ + /etc/systemd/system/wireupcameras.service +systemctl enable wireupcameras.service + +# Suspend on Snapdragon is still very unstable. This is the reason why +# 'mem_sleep_default=s2idle' is set explicitly in the cmdline as 'deep' mode +# does not function at all. +# Even then, suspending via gnome settings daemon results in hard freeze. +# This is why: +# logind behavior is kept intact with suspend behavior. +# gnome default power button behavior was replaced with 'interactive'. +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/systemd/logind.conf.d/60-surface-power-key.conf \ + /etc/systemd/login.conf.d/60-surface-power-key.conf +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/dconf/db/local.d/00-power-button \ + /etc/dconf/db/local.d/00-power-button +install -Dm644 /tmp/SayaAndy/surface-pro-12-inch-linux-fedora/etc/dconf/profile/user \ + /etc/dconf/profile/user + +dconf update + +restorecon -Rv /usr /lib /etc/systemd /etc/dconf /etc/udev/rules.d + +#====================================== +# Set the WSL name for ELN +#-------------------------------------- +if [[ "$kiwi_profiles" == *"WSL"* ]] && [[ "$kiwi_iname" == *"ELN"* ]]; then +wsl-setup --name Fedora-ELN +fi + +#====================================== # Finalization steps #-------------------------------------- # Inhibit the ldconfig cache generation unit, see rhbz2348669 @@ -386,4 +729,6 @@ if [[ "$kiwi_profiles" == *"FEX"* ]]; then rm /usr/bin/rm fi +rm -rf /tmp/* + exit 0 |